1. CNC Machining

It is CNC or numerical control, and it is also called machining center. In fact, it all means the same thing. It is divided into plane and inclined plane (or called curved surface). The scope of inclined plane is relatively small, while plane CNC is more extensive. Now, small processing parts such as insulating gaskets and insulating rods are processed by CNC method. The biggest feature of CNC is that it is flexible, fast and powerful, and it is a commonly used processing method at present.

2. Drilling

This is a common processing method. Whether it is testing the fixture or post-processing, it will go through "drilling". Larger manufacturers usually set up their own drilling rooms. The drilling room is usually closely related to the fixture, and the work of the drilling room is also It is not an easy job, but it is relatively free. Usually, the consumables and equipment used in the drilling room are drilling rigs, drill nozzles, rubber pellets, wooden pads, aluminum pads, etc.

3. Slitting

This is a common processing method on the market. Most stores have a cutting machine for cutting the sheet, and this is usually rough. The tolerance when processing G10 epoxy board/epoxy pipe can be controlled within 1mm to within 5mm.