Epoxy gasket is a kind of high temperature
resistant anti-corrosion sealing gasket, which can directly contact with flame,
and mainly works in high temperature and anti-corrosion environment. The cost
is low, and it is an ideal high temperature resistant and anticorrosive gasket.
Many products used in life are processed by epoxy board material FR4/G10/3240,
etc., because epoxy board material has good insulation properties and can be
used in various products. Performance characteristics such as good heat
insulation and certain toughness.
What points should be paid attention to
when selecting?
1. The surface of the gasket body is not
allowed to have scars, voids, unevenness and rust spots that affect the sealing
performance. The non-metallic band on the surface of the gasket body should be
even and appropriately higher than the metal band, and the interlayer texture
should be clear, but the metal band should not be exposed. The solder joint
spacing of metal spiral wound gaskets should be uniform, and there should be no
defects such as lack of fusion or over-melting.
2. The surface should not have defects such
as burrs, unevenness, rust spots, etc. The distance between the upper and lower
sealing surfaces of the gasket body and the upper and lower surfaces of the
reinforcement ring should be equal. The inner reinforcement ring and the gasket
body should be tightly fixed and not loose; The main body of the gasket should
be positioned and loosened appropriately.
3. Compression rate, resilience rate and
sealing performance are important performance indicators of epoxy gaskets.
Generally speaking, under the premise of meeting the compression rate
requirements, the higher the resilience rate, the better; while meeting the
requirements of the resilience rate standard Under the premise of, the test
value of the compression ratio is better. Products with good sealing
performance, moderate compression rate and the largest possible rebound rate
should be selected.
Get in touch with us today for a free quote on epoxy gaskets!
Skype: Chat on Skype
Email: info@jycncmachining.com
Phone: +86 15905915652