-
1.CNC Machiningof deep cavity molds In the process of automobile mold manufacturing, if you want to use a three-axis machining center to implement deep-cavity molds, you must lengthen the tool holder ...
2019-12-13
Read more
-
Turn-Milling Compound Machining Center refers to the place where lathe and milling machine are processed together. It is an advanced cutting processing method that uses the combined motion o...
2020-01-03
Read more
-
1. Insulation resistance and resistivity Resistance is the inverse of conductance, and resistivity is the resistance per unit volume. The smaller the conductivity of the data, the greater its resistan...
2020-02-20
Read more
-
Epoxy board is widely used. It can be used as insulation parts in electrical appliances. It has the characteristics of heat insulation, high voltage resistance and wear resistance. And some customers ...
2020-03-09
Read more
-
Tolerance level refers to the level that determines the accuracy of the size. The national standard is divided into 20 levels, from IT01, IT0, IT1, IT2 to IT18. The larger the number, the lower the to...
2020-03-16
Read more
-
Nylon, as a larger and more important variety in engineering plastics, has a strong vitality, mainly because it is modified to achieve high performance, followed by automotive, electrical appliances, ...
2020-04-08
Read more
-
1.Difficult to process titanium alloy materials 90% of medical device implant parts are made of Ti6Al-4V titanium alloy, which is derived from light weight, high strength and high biocompatibility. Ti...
2020-04-25
Read more
-
Corresponding to the processing of injection molded products, you will encounter problems like this, the product size is good, but the gloss of the product is indeed unqualified, which leads to scrapp...
2020-05-08
Read more
-
Due to the different materials of each product, the occurrence of defective products in the injection molding process often occurs. For example, rigid plastic products often have shock marks, so what ...
2020-05-13
Read more
-
1. Use sharp blades to reduce the cutting force of CNC milling machines. Machine blades are divided into coated and non-coated blades. Uncoated blades are usually sharper than coated blades, because i...
2020-05-18
Read more
-
1. Technical measures to solve metal wear or surface scratches by traditional processes 1.1 Repair welding + processing: This repair method is one of the most traditional methods for solvin...
2020-06-02
Read more
-
Regarding the surface identification of surgical instruments, due to the need for surgical identification, designers will make a variety of identification lines on the surface of implanted interventio...
2020-06-23
Read more