-
According to relevant industry sources, in the early 2019, the global lithium battery manufacturing capacity have reached to 316 GWh. Chinese lithium battery capacity ranked first one in the...
2019-08-29
Read more
-
Laser cutting uses a high-power density laser beam to irradiate the material being cut, which quickly heats the material to the vaporization temperature and evaporates to form holes. As the beam moves...
2019-12-27
Read more
-
A switchgear is an electrical device. The outside line of the switchgear first enters the main control switch in the cabinet, and then enters the sub-control switch. Each branch is set according to it...
2020-01-16
Read more
-
1. Insulation resistance and resistivity Resistance is the inverse of conductance, and resistivity is the resistance per unit volume. The smaller the conductivity of the data, the greater its resistan...
2020-02-20
Read more
-
Electrical aging is that the insulating materials and insulating structures in electrical equipment are subject to the action of electric fields during operation. Under the long-term effect of electri...
2020-03-03
Read more
-
Epoxy board is widely used. It can be used as insulation parts in electrical appliances. It has the characteristics of heat insulation, high voltage resistance and wear resistance. And some customers ...
2020-03-09
Read more
-
SMC insulation board has the advantages of good insulation performance and strong tensile resistance. When used, it has some good performances. These performances can not only improve its strength, bu...
2020-09-26
Read more
-
1. What are the general heat resistance grades of the motor winding insulation? Answer: Motor winding insulation can be roughly divided into: Class A, Class E, Class B, Class F, Class H and Class C. 2...
2020-10-11
Read more
-
1.Sample thickness: When the insulating plate material is very thin, the breakdown voltage is proportional to the thickness, that is, the electrical strength has nothing to do with the thickness. When...
2020-10-24
Read more
-
The main body of ABS plastic is a blend or ternary blend of acrylonitrile, butadiene and styrene, which is a tough and rigid thermoplastic. Styrene makes ABS have good molding, gloss and rigidity; acr...
2021-05-15
Read more
-
Epoxy rods are also commonly known as pull rods. The rods with circular cross-sections formed by hot pressing of forming molds have high mechanical and dielectric properties and are suitable for insul...
2021-08-12
Read more
-
The development direction of epoxy resin electronic and electrical encapsulation and insulation materials is mainly to improve the heat resistance, dielectric and flame retardancy of the material, and...
2021-09-07
Read more