-
The fr4 epoxy board is a code for the grade of flame-resistant material, which represents a material specification that the resin material must be able to extinguish itself after the burning state. Ep...
2020-08-29
Read more
-
The aluminum profile industry has become a very mature industry. The aluminum density is only 2.7g/cm. Although it is soft, it can be made into duralumin, hard aluminum, rust-proof aluminum, cast alum...
2020-08-31
Read more
-
FR4 G10 epoxy board is a kind of high polymer that can be used in medium temperature environment. It is also a typical insulating material. Its main component is epoxy resin, so it will generally show...
2020-09-05
Read more
-
1. Sheet blanking The CNC punch press is affected by the tool. For the processing of some special-shaped workpieces and irregular holes, large burrs will appear on the edges. The later deburring must ...
2020-09-22
Read more
-
Literally, "numerical control" and "machining center" are two keywords. "Numerical control" means "digital control", which is what we often call CNC. The control system can logically process programs ...
2020-10-31
Read more
-
Polytetrafluoroethylene (Poly tetra fluoroethylene, abbreviated as PTFE), commonly known as "Plastic King", is a high molecular polymer made by polymerizing tetrafluoroethylene as a monomer. White wax...
2021-03-06
Read more
-
PVDF, or polyvinylidene fluoride, is a highly non-reactive thermoplastic fluoropolymer that can be synthesized by the polymerization of vinylidene fluoride. PVDF (polyvinylidene fluoride) has the stro...
2021-03-09
Read more
-
PC is polycarbonate. It is a new type of thermoplastic with a transparency of 90% and is known as a transparent metal. It is rigid and tough, has high impact strength, high dimensional stability and a...
2021-03-22
Read more
-
PC: Polycarbonate is a high molecular weight polymer containing carbonate groups in the molecular chain. It is a tough thermoplastic resin whose name comes from the CO3 group inside. Can be synthesize...
2021-03-30
Read more
-
As cars become more and more common, the amount of plastic used in the automotive industry is increasing, especially the parts in the car put forward higher requirements for the use of materials. ...
2021-05-14
Read more
-
The main body of ABS plastic is a blend or ternary blend of acrylonitrile, butadiene and styrene, which is a tough and rigid thermoplastic. Styrene makes ABS have good molding, gloss and rigidity; acr...
2021-05-15
Read more
-
1.Principle: Using electrolytic water technology, an energy device that extracts hydrogen and oxygen gas from water with electricity. Among them, hydrogen is used as fuel and oxygen is used to support...
2021-05-28
Read more
