-
1. Sheet blanking The CNC punch press is affected by the tool. For the processing of some special-shaped workpieces and irregular holes, large burrs will appear on the edges. The later deburring must ...
2020-09-22
Read more
-
Reactor is an indispensable important component of the entire power system. The reactor generally used in the frequency converter can not only prevent the interference from the grid, but also reduce t...
2020-09-07
Read more
-
FR4 G10 epoxy board is a kind of high polymer that can be used in medium temperature environment. It is also a typical insulating material. Its main component is epoxy resin, so it will generally show...
2020-09-05
Read more
-
The aluminum profile industry has become a very mature industry. The aluminum density is only 2.7g/cm. Although it is soft, it can be made into duralumin, hard aluminum, rust-proof aluminum, cast alum...
2020-08-31
Read more
-
The fr4 epoxy board is a code for the grade of flame-resistant material, which represents a material specification that the resin material must be able to extinguish itself after the burning state. Ep...
2020-08-29
Read more
-
Aluminum alloy is widely used in product shells because of its high strength, light weight, good corrosion resistance and easy processing. Aluminum alloy shells have been widely used in daily life, su...
2020-08-29
Read more
-
With the development of society and the advancement of technology, equipment manufacturers have higher and higher requirements for the internal quality and appearance of aluminum alloy shell parts. In...
2020-08-28
Read more
-
What Is Garolite G10/FR4? Garolite G10/FR4 is one of the most versatile and widely used thermoset glass-reinforced laminate. It is made from an alkali-free electrical glass cloth that h...
2020-08-19
Read more
-
When the melt is injected into a cavity with a large volume under high-speed and high-pressure conditions, melt fracture is very easy to occur. At this time, the surface of the melt appears transverse...
2020-08-07
Read more
