-
1.CNC Machiningof deep cavity molds In the process of automobile mold manufacturing, if you want to use a three-axis machining center to implement deep-cavity molds, you must lengthen the tool holder ...
2019-12-13
Read more
-
Turn-Milling Compound Machining Center refers to the place where lathe and milling machine are processed together. It is an advanced cutting processing method that uses the combined motion o...
2020-01-03
Read more
-
A switchgear is an electrical device. The outside line of the switchgear first enters the main control switch in the cabinet, and then enters the sub-control switch. Each branch is set according to it...
2020-01-16
Read more
-
There are two main purposes of precision stamping mold polishing. One is to increase the brightness and precision of the precision mold. The second is to make the mold easy to demold. When polishing, ...
2020-02-13
Read more
-
1. Insulation resistance and resistivity Resistance is the inverse of conductance, and resistivity is the resistance per unit volume. The smaller the conductivity of the data, the greater its resistan...
2020-02-20
Read more
-
Epoxy board is widely used. It can be used as insulation parts in electrical appliances. It has the characteristics of heat insulation, high voltage resistance and wear resistance. And some customers ...
2020-03-09
Read more
-
Tolerance level refers to the level that determines the accuracy of the size. The national standard is divided into 20 levels, from IT01, IT0, IT1, IT2 to IT18. The larger the number, the lower the to...
2020-03-16
Read more
-
Stainless steel has unique characteristics such as unique strength, high abrasion resistance, superior anti-corrosion performance and resistance to rust. Therefore, it is widely used in industry, food...
2020-03-23
Read more
-
A method of plating a layer of nickel on a metal or some non-metals by electrolytic or chemical methods is called nickel plating. Nickel plating is divided into electroplated nickel and electroless ni...
2020-04-01
Read more
-
Nylon, as a larger and more important variety in engineering plastics, has a strong vitality, mainly because it is modified to achieve high performance, followed by automotive, electrical appliances, ...
2020-04-08
Read more
-
1.Difficult to process titanium alloy materials 90% of medical device implant parts are made of Ti6Al-4V titanium alloy, which is derived from light weight, high strength and high biocompatibility. Ti...
2020-04-25
Read more
-
Corresponding to the processing of injection molded products, you will encounter problems like this, the product size is good, but the gloss of the product is indeed unqualified, which leads to scrapp...
2020-05-08
Read more