-
Nylon, as a larger and more important variety in engineering plastics, has a strong vitality, mainly because it is modified to achieve high performance, followed by automotive, electrical appliances, ...
2020-04-08
Read more
-
Corresponding to the processing of injection molded products, you will encounter problems like this, the product size is good, but the gloss of the product is indeed unqualified, which leads to scrapp...
2020-05-08
Read more
-
Due to the different materials of each product, the occurrence of defective products in the injection molding process often occurs. For example, rigid plastic products often have shock marks, so what ...
2020-05-13
Read more
-
The clamping force refers to the large clamping force that can be applied to the mold by the mold clamping structure of the injection molding machine. It is set in order to resist the expansion force ...
2020-07-06
Read more
-
Polyformaldehyde (POM) thermoplastic crystalline polymer. Known as "Super Steel" or "Sai Steel", The English abbreviation is POM. Generally, polymers obtained by formaldehyde polymerization have a low...
2020-07-16
Read more
-
PET is a milky white or light yellow highly crystalline polymer with a smooth and shiny surface. Creep resistance, fatigue resistance, abrasion resistance, good dimensional stability, low abrasion and...
2020-07-28
Read more
-
When the melt is injected into a cavity with a large volume under high-speed and high-pressure conditions, melt fracture is very easy to occur. At this time, the surface of the melt appears transverse...
2020-08-07
Read more
-
Polyurethane (PU), whose full name is polyurethane, is a polymer compound. A new type of material between plastic and rubber. It has the rigidity of plastic and the elasticity of rubber. Characteristi...
2021-03-03
Read more
-
Polytetrafluoroethylene (Poly tetra fluoroethylene, abbreviated as PTFE), commonly known as "Plastic King", is a high molecular polymer made by polymerizing tetrafluoroethylene as a monomer. White wax...
2021-03-06
Read more
-
PVDF, or polyvinylidene fluoride, is a highly non-reactive thermoplastic fluoropolymer that can be synthesized by the polymerization of vinylidene fluoride. PVDF (polyvinylidene fluoride) has the stro...
2021-03-09
Read more
-
PC: Polycarbonate is a high molecular weight polymer containing carbonate groups in the molecular chain. It is a tough thermoplastic resin whose name comes from the CO3 group inside. Can be synthesize...
2021-03-30
Read more
-
As cars become more and more common, the amount of plastic used in the automotive industry is increasing, especially the parts in the car put forward higher requirements for the use of materials. ...
2021-05-14
Read more