-
Due to the different materials of each product, the occurrence of defective products in the injection molding process often occurs. For example, rigid plastic products often have shock marks, so what ...
2020-05-13
Read more
-
Corresponding to the processing of injection molded products, you will encounter problems like this, the product size is good, but the gloss of the product is indeed unqualified, which leads to scrapp...
2020-05-08
Read more
-
1.Difficult to process titanium alloy materials 90% of medical device implant parts are made of Ti6Al-4V titanium alloy, which is derived from light weight, high strength and high biocompatibility. Ti...
2020-04-25
Read more
-
Wire cutting is a technology to achieve the workpiece size processing. Under certain equipment conditions, the reasonable formulation of processing routes is an important part of ensuring the processi...
2020-04-20
Read more
-
1. Different strength: T1 pure copper mechanical properties tensile strength: σb (MPa) ≥295; T2 copper tensile strength σb (Mpa): ≥195; T3 copper tensile strength σb (MPa): ≥210; ...
2020-04-13
Read more
-
Nylon, as a larger and more important variety in engineering plastics, has a strong vitality, mainly because it is modified to achieve high performance, followed by automotive, electrical appliances, ...
2020-04-08
Read more
-
A method of plating a layer of nickel on a metal or some non-metals by electrolytic or chemical methods is called nickel plating. Nickel plating is divided into electroplated nickel and electroless ni...
2020-04-01
Read more
-
Stainless steel has unique characteristics such as unique strength, high abrasion resistance, superior anti-corrosion performance and resistance to rust. Therefore, it is widely used in industry, food...
2020-03-23
Read more
-
Tolerance level refers to the level that determines the accuracy of the size. The national standard is divided into 20 levels, from IT01, IT0, IT1, IT2 to IT18. The larger the number, the lower the to...
2020-03-16
Read more
