-
The star wheel is a fixture used in various plane polishing processes such as glass, lens, silicon wafer, hard disk, etc. It is also called polishing jig, polishing pad, etc. The polishing process has...
2021-08-30
Read more
-
The development direction of epoxy resin electronic and electrical encapsulation and insulation materials is mainly to improve the heat resistance, dielectric and flame retardancy of the material, and...
2021-09-07
Read more
-
It is necessary to pay attention to the use of insulating rods 1. Before operation, the surface of the stick should be wiped with a dry cloth to make the surface of the stick dry and clean. Take care ...
2021-09-15
Read more
-
1.When storing, choose a well-ventilated, clean and boring place, and hang the square on the special gate pole rack, and the special person will handle it. The insulating rods should not be in contact...
2021-09-23
Read more
-
Titanium alloy parts have the characteristics of low density and good corrosion resistance, so they have become ideal structural materials for aerospace engineering. However, there are also many facto...
2021-09-28
Read more
-
The stability, reliability and practicability of the machined parts can be reflected in the surface accuracy and quality of the machined parts. There are many ways to extend parts, but the most import...
2021-10-16
Read more
-
What Is 5-Axis CNC Machining? Five-axis machining is a mode of CNC machining, including all axes of four-axis machining, and an additional rotation axis. Five-axis machine tools are today's most effic...
2021-10-16
Read more
-
Bakelite is a man-made synthetic chemical substance. Once it is heated and formed, it cannot be molded into other things after solidification. Because of its non-absorbent, non-conductive, high-temper...
2021-11-18
Read more
-
Epoxy resin pipe is a commonly used electronic and electrical insulating material. It is resistant to high voltage, corrosion, high temperature, high strength, and good electrothermal performance. It ...
2021-12-22
Read more
-
FR4 epoxy glass fiber board is a kind of substrate with epoxy resin as adhesive and electronic grade glass fiber cloth as reinforcing material. Its bonding sheet and inner core thin copper clad lamina...
2022-04-15
Read more
-
G10 is a handle material made of fiberglass epoxy. The glass fibers are soaked in epoxy resin and then compressed into the desired shape using heat and pressing. The manufacturing process of the Micar...
2022-05-12
Read more
-
The raw material properties of epoxy resin rods in terms of high temperature performance, low temperature performance, tensile performance and water permeability are tested. The specific test methods ...
2022-06-11
Read more