-
G10 epoxy pipe has high mechanical strength and is suitable for harsh operating environment; the coating has strong adhesion, high bonding strength and good impact resistance. Internal and external co...
2021-08-21
Read more
-
The molding process of G11 epoxy glass fiber tube is to impregnate the glass fiber filament with resin and then solidify it in a high-speed polymerization device integrated with photoelectric and heat...
2021-08-23
Read more
-
The epoxy glass fiber tube is made of thermosetting epoxy resin as the main raw material, air is used as the dispersion medium, and the powder is evenly sprayed on the surface of the preheated steel t...
2021-08-23
Read more
-
The star wheel is a fixture used in various plane polishing processes such as glass, lens, silicon wafer, hard disk, etc. It is also called polishing jig, polishing pad, etc. The polishing process has...
2021-08-30
Read more
-
The development direction of epoxy resin electronic and electrical encapsulation and insulation materials is mainly to improve the heat resistance, dielectric and flame retardancy of the material, and...
2021-09-07
Read more
-
It is necessary to pay attention to the use of insulating rods 1. Before operation, the surface of the stick should be wiped with a dry cloth to make the surface of the stick dry and clean. Take care ...
2021-09-15
Read more
-
1.When storing, choose a well-ventilated, clean and boring place, and hang the square on the special gate pole rack, and the special person will handle it. The insulating rods should not be in contact...
2021-09-23
Read more
-
Introduction Laminates are composed of two or more layers of resin-impregnated fibers or fabrics that are laminated and thermally pressed into a whole. It can be a plate, tube, rod or other shape. Lam...
2021-09-25
Read more
-
How to hot press composites? Push the charging cart assembly into the middle of the hot plate of the multi-layer press, the hot plate rises slowly, and pressurizes to pass steam to suppress after clos...
2021-09-27
Read more
-
Titanium alloy parts have the characteristics of low density and good corrosion resistance, so they have become ideal structural materials for aerospace engineering. However, there are also many facto...
2021-09-28
Read more
-
1. Storage condition The surface of this product is made of high-temperature treated silicone resin. Because the product has a certain degree of flexibility, it will be damaged in contact with the gro...
2021-10-11
Read more
-
The stability, reliability and practicability of the machined parts can be reflected in the surface accuracy and quality of the machined parts. There are many ways to extend parts, but the most import...
2021-10-16
Read more
