-
What is G11 epoxy glass fiber tube? G11 epoxy glass fiber tube is made of glass fiber yarn and resin.This grade is similar to G10/FR4, with the addition of a higher operating temperature and some impr...
2022-01-18
Read more
-
Epoxy gasket is a commonly used gasket in fluid machinery. Because of its high strength and good sealing, it often plays its own role in related machinery. The more common machinery such as compressor...
2022-02-19
Read more
-
In order to ensure better quality of insulation board, insulation board manufacturers need to dehumidify its raw materials. There are two kinds of drying equipment for insulation board raw materials, ...
2022-02-26
Read more
-
Because of its insulating layer, no electrostatic induction, wear resistance and heat resistance, bakelite has become an insulating layer power switch and adjustable resistance for electronic equipmen...
2022-03-12
Read more
-
What’s epoxy glass filament wound tubing? Epoxy glass filament wound tubes are wound from glass flaments dipped in epoxy resin. Once cured, the tube offers excellent mechanical, electri...
2022-03-26
Read more
-
Mainly are out of tolerance, corrugated, fluffed, blistered and uneven surface, etc. (1) The out-of-tolerance pipe diameter is mainly because the resin content of the prepreg is too high or exceeds th...
2022-04-02
Read more
-
FR4 epoxy glass fiber board is a kind of substrate with epoxy resin as adhesive and electronic grade glass fiber cloth as reinforcing material. Its bonding sheet and inner core thin copper clad lamina...
2022-04-15
Read more
-
There are three main types of glass fiber tube production processes: reciprocating filament winding process, continuous filament winding process and centrifugal casting process. Reciprocating filament...
2022-04-19
Read more
-
G11 epoxy glass fiber pipe is a kind of mixed insulating material, which is made by mixing chemical epoxy resin glue and glass fiber (rayon). The glass fiber is impregnated with ultra-low viscosity an...
2022-04-27
Read more
-
1. The surface of 3240 epoxy board is required to be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentations, stains, and a...
2022-05-07
Read more
-
G10 is a handle material made of fiberglass epoxy. The glass fibers are soaked in epoxy resin and then compressed into the desired shape using heat and pressing. The manufacturing process of the Micar...
2022-05-12
Read more
-
The insulation board is made of glue-type insulating material, and there should be no harmful irregularities on the upper and lower surfaces of the insulating pad. Detrimental irregularities of insula...
2022-05-28
Read more
