-
What is G11 epoxy glass fiber tube? G11 epoxy glass fiber tube is made of glass fiber yarn and resin.This grade is similar to G10/FR4, with the addition of a higher operating temperature and some impr...
2022-01-18
Read more
-
What’s epoxy glass filament wound tubing? Epoxy glass filament wound tubes are wound from glass flaments dipped in epoxy resin. Once cured, the tube offers excellent mechanical, electri...
2022-03-26
Read more
-
Mainly are out of tolerance, corrugated, fluffed, blistered and uneven surface, etc. (1) The out-of-tolerance pipe diameter is mainly because the resin content of the prepreg is too high or exceeds th...
2022-04-02
Read more
-
There are three main types of glass fiber tube production processes: reciprocating filament winding process, continuous filament winding process and centrifugal casting process. Reciprocating filament...
2022-04-19
Read more
-
G11 epoxy glass fiber pipe is a kind of mixed insulating material, which is made by mixing chemical epoxy resin glue and glass fiber (rayon). The glass fiber is impregnated with ultra-low viscosity an...
2022-04-27
Read more
-
1. The surface of 3240 epoxy board is required to be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentations, stains, and a...
2022-05-07
Read more
-
G10 is a handle material made of fiberglass epoxy. The glass fibers are soaked in epoxy resin and then compressed into the desired shape using heat and pressing. The manufacturing process of the Micar...
2022-05-12
Read more
-
The properties of GPO-3 fiberglass: 1.Good flame retardancy (flame retardant grade 94ulv0) 2. Good arc resistance (182 seconds) 3. Good resistance to anti-leakage traces (resistance to anti-leakage tr...
2022-05-21
Read more
-
The tension of the insulation winding tube refers to the tensioning force of the fibers during the winding process of the insulating tube, the uniformity of the tension of each bundle of fibers and th...
2022-06-23
Read more