-
According to relevant industry sources, in the early 2019, the global lithium battery manufacturing capacity have reached to 316 GWh. Chinese lithium battery capacity ranked first one in the...
2019-08-29
Read more
-
A switchgear is an electrical device. The outside line of the switchgear first enters the main control switch in the cabinet, and then enters the sub-control switch. Each branch is set according to it...
2020-01-16
Read more
-
1. Insulation resistance and resistivity Resistance is the inverse of conductance, and resistivity is the resistance per unit volume. The smaller the conductivity of the data, the greater its resistan...
2020-02-20
Read more
-
SMC insulation board has the advantages of good insulation performance and strong tensile resistance. When used, it has some good performances. These performances can not only improve its strength, bu...
2020-09-26
Read more
-
1.Sample thickness: When the insulating plate material is very thin, the breakdown voltage is proportional to the thickness, that is, the electrical strength has nothing to do with the thickness. When...
2020-10-24
Read more
-
Epoxy rods are also commonly known as pull rods. The rods with circular cross-sections formed by hot pressing of forming molds have high mechanical and dielectric properties and are suitable for insul...
2021-08-12
Read more
-
The molding process of G11 epoxy glass fiber tube is to impregnate the glass fiber filament with resin and then solidify it in a high-speed polymerization device integrated with photoelectric and heat...
2021-08-23
Read more
-
The epoxy glass fiber tube is made of thermosetting epoxy resin as the main raw material, air is used as the dispersion medium, and the powder is evenly sprayed on the surface of the preheated steel t...
2021-08-23
Read more
-
The development direction of epoxy resin electronic and electrical encapsulation and insulation materials is mainly to improve the heat resistance, dielectric and flame retardancy of the material, and...
2021-09-07
Read more
-
It is necessary to pay attention to the use of insulating rods 1. Before operation, the surface of the stick should be wiped with a dry cloth to make the surface of the stick dry and clean. Take care ...
2021-09-15
Read more
-
1.When storing, choose a well-ventilated, clean and boring place, and hang the square on the special gate pole rack, and the special person will handle it. The insulating rods should not be in contact...
2021-09-23
Read more
-
1. Storage condition The surface of this product is made of high-temperature treated silicone resin. Because the product has a certain degree of flexibility, it will be damaged in contact with the gro...
2021-10-11
Read more