-
Regarding the surface identification of surgical instruments, due to the need for surgical identification, designers will make a variety of identification lines on the surface of implanted interventio...
2020-06-23
Read more
-
The clamping force refers to the large clamping force that can be applied to the mold by the mold clamping structure of the injection molding machine. It is set in order to resist the expansion force ...
2020-07-06
Read more
-
There are several coloring methods for stainless steel parts 1. Electroplating Electroplating: The process of attaching a metal film to the surface of metal or other materials by electrolysis. It can ...
2020-07-24
Read more
-
PET is a milky white or light yellow highly crystalline polymer with a smooth and shiny surface. Creep resistance, fatigue resistance, abrasion resistance, good dimensional stability, low abrasion and...
2020-07-28
Read more
-
How to save CNC milling costs? Why some custom CNC milling services are expensive? Firstly, we may need to know the cost factors for CNC milling services. 1)Stock Material As with any type of manufact...
2020-07-31
Read more
-
When the melt is injected into a cavity with a large volume under high-speed and high-pressure conditions, melt fracture is very easy to occur. At this time, the surface of the melt appears transverse...
2020-08-07
Read more
-
SMC insulation board has the advantages of good insulation performance and strong tensile resistance. When used, it has some good performances. These performances can not only improve its strength, bu...
2020-09-26
Read more
-
To correctly judge whether the SMC insulation board is of good quality, then we need its material to start, and the method of inspecting the material is to analyze and inspect these materials, and the...
2020-09-26
Read more
-
When the electric field strength of the epoxy board applied to the insulating material is higher than the critical value, the current through the insulating material will increase sharply, the insulat...
2020-09-26
Read more
-
1. What are the general heat resistance grades of the motor winding insulation? Answer: Motor winding insulation can be roughly divided into: Class A, Class E, Class B, Class F, Class H and Class C. 2...
2020-10-11
Read more
-
The resistance value of the insulating board is an important indicator for judging whether it is qualified. The resistance value of a good product must pass, and the resistance value may be unstable d...
2020-10-24
Read more
-
1.Sample thickness: When the insulating plate material is very thin, the breakdown voltage is proportional to the thickness, that is, the electrical strength has nothing to do with the thickness. When...
2020-10-24
Read more